Item # GB442
Price: $169.99
In Stock
In Stock
Pre-order only. Available after: 06/20/2013
Ships after: 06/20/2013
Back Order Item
Out of stock
Can't Order
·Swedish steel
·27" Hickory handle
·Axe head weighs 3-1/2 lbs.
·Grain leather sheath
Item # GB490
Price: $259.99
In Stock
In Stock
Pre-order only. Available after: 06/20/2013
Ships after: 06/20/2013
Back Order Item
Out of stock
Can't Order
·Swedish steel
·Hickory handle
·Grain leather sheath
Item # CTC50DR36C
Price: $49.99
In Stock
In Stock
Pre-order only. Available after: 06/20/2013
Ships after: 06/20/2013
Back Order Item
Out of stock
Can't Order
All of Council Tools® axe heads are drop forged from high quality tool steel. The forging is then processed in an abrasive robotic work cell where the trim lines are removed, the shape refined and the cutting edges are ground, which yields highly consistent heads. Cutting edges are then heat treated and tempered. ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool® internal standards call for tempered bit hardness of Rc 48-55 targeting 1-1/4" from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition. The final sharpening of the cutting edge is by hand using fine grit abrasives. Care is taken to not affect the tempered hardness of the bit. Heads are either painted or lacquered to deter rust and all polished surfaces are lacquered or oiled. American hickory handles are dried to below 10% moisture content to minimize shrinkage and help prevent loosening. Handles are affixed to the heads using an extruded aluminum wedge which locks the head in a mechanical bond.
·Tool steel axe head with rust protective coating
·American hickory handle
·5-3/16" cutting edge
·8-3/8" wide
·1" thick
·34-1/4" overall
·Made in USA
Item # CTC60DR36C
Price: $53.99
In Stock
In Stock
Pre-order only. Available after: 06/20/2013
Ships after: 06/20/2013
Back Order Item
Out of stock
Can't Order
All of Council Tools® axe heads are drop forged from high quality tool steel. The forging is then processed in an abrasive robotic work cell where the trim lines are removed, the shape refined and the cutting edges are ground, which yields highly consistent heads. Cutting edges are then heat treated and tempered. ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool® internal standards call for tempered bit hardness of Rc 48-55 targeting 1-1/4" from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition. The final sharpening of the cutting edge is by hand using fine grit abrasives. Care is taken to not affect the tempered hardness of the bit. Heads are either painted or lacquered to deter rust and all polished surfaces are lacquered or oiled. American hickory handles are dried to below 10% moisture content to minimize shrinkage and help prevent loosening. Handles are affixed to the heads using an extruded aluminum wedge which locks the head in a mechanical bond.
·Tool steel axe head with rust protective coating
·American hickory handle
·4-7/8" cutting edge
·Width: 8-3/8"
·Thickness: 1-1/8"
·6lb axe head
·35-3/8" overall
·Made in U.S.A.
Item # CTC35DR36C
Price: $36.99
In Stock
In Stock
Pre-order only. Available after: 06/20/2013
Ships after: 06/20/2013
Back Order Item
Out of stock
Can't Order
All of Council Tools® axe heads are drop forged from high quality tool steel. The forging is then processed in an abrasive robotic work cell where the trim lines are removed, the shape refined and the cutting edges are ground, which yields highly consistent heads. Cutting edges are then heat treated and tempered. ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool® internal standards call for tempered bit hardness of Rc 48-55 targeting 1-1/4" from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition. The final sharpening of the cutting edge is by hand using fine grit abrasives. Care is taken to not affect the tempered hardness of the bit. Heads are either painted or lacquered to deter rust and all polished surfaces are lacquered or oiled. American hickory handles are dried to below 10% moisture content to minimize shrinkage and help prevent loosening. Handles are affixed to the heads using an extruded aluminum wedge which locks the head in a mechanical bond.
·Tool steel axe head with rust protective coating
·American hickory handle
·4-3/4" cutting edge
·3.5lb axe head
·36" overall
·Made in U.S.A.
Item # CTC38PE136
Price: $61.99
In Stock
In Stock
Pre-order only. Available after: 06/20/2013
Ships after: 06/20/2013
Back Order Item
Out of stock
Can't Order
All of Council Tools® axe heads are drop forged from high quality tool steel. The forging is then processed in an abrasive robotic work cell where the trim lines are removed, the shape refined and the cutting edges are ground, which yields highly consistent heads. Cutting edges are then heat treated and tempered. ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool® internal standards call for tempered bit hardness of Rc 48-55 targeting 1-1/4" from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition. The final sharpening of the cutting edge is by hand using fine grit abrasives. Care is taken to not affect the tempered hardness of the bit. Heads are either painted or lacquered to deter rust and all polished surfaces are lacquered or oiled. American hickory handles are dried to below 10% moisture content to minimize shrinkage and help prevent loosening. Handles are affixed to the heads using an extruded aluminum wedge which locks the head in a mechanical bond.
·Tool steel axe head with rust protective coating
·American hickory handle
·4-1/2" cutting edge
·7" long mattock head
·Thickness: 11/16"
·35" overall
·Made in U.S.A.
Item # GB450
Price: $189.99
In Stock
In Stock
Pre-order only. Available after: 06/20/2013
Ships after: 06/20/2013
Back Order Item
Out of stock
Can't Order
·Swedish steel
·31" Hickory handle
·Circular grooves at the grip
·Steel collar near the head
·Axe head weighs 5-1/2 lbs.
·Grain leather sheath
Item # SAW16H
Price: $102.99
In Stock
In Stock
Pre-order only. Available after: 06/20/2013
Ships after: 06/20/2013
Back Order Item
Out of stock
Can't Order
For over a hundred years, in the heat, soot and noise of the Wetterlings forge, workers have been hammering shape, soul and passion into glowing iron. Each Wetterlings axe is made to last, to be passed down through generations.
·Swedish steel alloy axe head with 3" edge
·Width from edge to back: 6-1/8"
·Thickness: 3/4"
·Hickory handle with lanyard hole
·15-1/2" overall
·Leather sheath for blade edge
·Made in Sweden
·Care and use instructions included
·Made in Sweden
Item # SAW174
Price: $119.99
In Stock
In Stock
Pre-order only. Available after: 06/20/2013
Ships after: 06/20/2013
Back Order Item
Out of stock
Can't Order
For over a hundred years, in the heat, soot and noise of the Wetterlings forge, workers have been hammering shape, soul and passion into glowing iron. Each Wetterlings axe is made to last, to be passed down through generations.
·Swedish steel alloy axe head with 3" edge and green enamel finish
·Width from edge to back: 5-1/2"
·Thickness: 11/16"
·Nail puller
·Hickory handle with red enamel accent
·15" overall
·Sew on patch
·Made in Sweden
·Care and use instructions included
·Made in Sweden
Item # TPFDX17
Price: $79.99
In Stock
In Stock
Pre-order only. Available after: 06/20/2013
Ships after: 06/20/2013
Back Order Item
Out of stock
Can't Order
·Black coated 1095 carbon steel construction
·7-1/8" overall
·Kydex® sheath with carabiner clip (non load bearing) and survival whistle
·Made in the USA
Item # SCTAXE3
Price: $44.99
In Stock
In Stock
Pre-order only. Available after: 06/20/2013
Ships after: 06/20/2013
Back Order Item
Out of stock
Can't Order
·Titanium coated 3Cr13 stainless steel
·3-3/8" axe cutting edge
·1-1/2" pick
·7-5/8" wide
·1/4" thick
·K10 handle
·17" overall
·Nylon sheath
·Made in China
Item # SOGF17NCP
Price: $67.99
In Stock
In Stock
Pre-order only. Available after: 06/20/2013
Ships after: 06/20/2013
Back Order Item
Out of stock
Can't Order
It's called the Backcountry Axe™ for a reason - many actually - starting with its GRN handle with solid fiberglass core, joined to the cutting head for increased handle strength. Its forged head gives it increased strength and durability, while a cutout decreases friction when cutting. The flat back is perfect for hammering tent stakes into hard ground. But baddest of all is the saw hidden in the handle, featuring an auto-deploying hand-guard. With two tools in one, you can clear twice the brush, twice as fast. Then stow it in its molded sheath with belt clip for safe and secure carrying.
·1055C steel axe head with raw forged finish
·Flat vack for hammering
·3" Cutting edge
·16" overall
·Black molded nylon sheath
·Strong and up to any task
·Glass reinforced nylon handlle with a solid fiberglass core that is joined to the cutting head for increased strength
·Includes removable integrated saw with auto-deploying hand guard
·Made in Taiwan
