Item # G345
Old Price: $11.99
Now Only: $9.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
E.A.B.=Exchange-A-Blade uses contractor or standard grade utility blades that can be easily replaced as necessary.
·Linerlock
·K5 contractor grade high carbon utility blade included
·1-1/2" blade length
·Stainless steel handle with slotted design
·Pocket clip/money clip
·3" closed
·Made in China
Item # BMK038
Price: $7.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
·(3) ceramic utility blades
·Sharper than steel
·Never rust
·Good for fiine cutting
·2-3/8" utility blades
·Blade widths: 3/4"
·Blade thicknesses: 1/16"
·Made in China
Item # SOGEL01
Price: $29.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
Get charged up with the Kilowatt, the first working theme knife designed for the electrician, homeowner, contractor, or anyone who might need to strip wire in a pinch. Three separate systems address wire from fine multistrand all the way up to cable.
·AUS-8 stainless steel blade
·Electrical outlets blade imprint
·Insulator thumb stud
·Zytel® handle with schematic design on front and back
·"High voltage tower" pocket clip
·Stripper bar for wire sizes 12-24
·Adjustable spring loaded UTP/wire stripper
·Patent pending hole stripper employing the main blade
·Contractor grade
·3-1/8" spear blade length
·4-3/8" closed
·Made in Taiwan
Item # MH006
Price: $4.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
·Stainless steel construction
·Can opener
·Knife edge
·Small and medium screwdrivers
·Ruler
·Bottle opener
·Reflective tape signaling device
·Morse code S.O.S. and help etching
·4 position wrench
·Saw edge
·Map tool
·Wire/cord cutter
·Measures: 2-3/4" x 1-3/4" x 1/16"
·Vinyl pouch
·Made in China
Item # CA2138SS
Price: $29.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 06/01/2013
Back Order Item
Out of stock
Can't Order
Countless hardworking Americans depend on these rugged knives every day.
·Tru-Sharp surgical steel blade
·Black composition handle
·Brass pins and liners
·4-1/2" Blade
·Blade Thickness: 1/8"
·Blade Width: 3/4"
·4-5/8" closed
·Made in the USA
Item # FS440B
Price: $11.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
There is more than 300 years experience behind today's modern Frosts factory. Frosts Knivfabrik was started more than 100 years ago by Erik Frost, an experienced knifesmith in the village of Ostnor outside of Mora, Sweden. His "Mora knives" were soon widely acclaimed not only throughout Sweden but also abroad. Success was quickly gained through their superior and outstanding sharpness and toughness. Fourth generation knifesmiths carry on the traditions in a modern factory situated on the same site as the original from 1891.
·Sandvik cold-rolled special stainless steel blade
·Black composition handle
·Lanyard hole
·3-3/4" clip pt blade length
·8-1/4" overall
·Black composition sheath with lanyard hole
·Rubber belt attachment in color matching the knife
Item # BMK028
Price: $4.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
·420 Stainless steel construction
·Brushed finish
·Finger holes
·1-3/4" dagger blade
·Blade width: 1-1/2"
·Blade thickness: 3/32"
·2-3/4" overall
·Nylon belt sheath
·Made in China
Item # FS440Y
Price: $11.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
There is more than 300 years experience behind today's modern Frosts factory. Frosts Knivfabrik was started more than 100 years ago by Erik Frost, an experienced knifesmith in the village of Ostnor outside of Mora, Sweden. His "Mora knives" were soon widely acclaimed not only throughout Sweden but also abroad. Success was quickly gained through their superior and outstanding sharpness and toughness. Fourth generation knifesmiths carry on the traditions in a modern factory situated on the same site as the original from 1891.
·Sandvik cold-rolled special stainless steel blade
·Yellow composition handle
·Lanyard hole
·3-3/4" clip pt blade length
·8-1/4" overall
·Black composition sheath with lanyard hole
·Rubber belt attachment in color matching the knife
Item # 210580
Price: $3.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
·Stainless steel blade
·Wood handle
·Brass pins and liners
·3-1/2" clip pt blade length
·4-1/4" closed
Item # CA80032
Price: $26.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
The yellow handle has been a favorite since the earliest days of Case®. Many a farmer, rancher, and hunter find the yellow color an advantage in locating a dropped knife.
·Tru-Sharp surgical steel blade
·Yellow composition handle
·Brass pins and liners
·2-3/4" mod drop blade length
·2-3/4" Blade
·Blade Thickness: 1/16"
·Blade Width: 3/4"
·3-5/8" closed
·Made in the USA
Item # SK908
Price: $2.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
·Box of (50) standard utility blades
·Stainless steel construction
Item # FS612
Price: $16.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
There is more than 300 years experience behind today's modern Frosts factory. Frosts Knivfabrik was started more than 100 years ago by Erik Frost, an experienced knifesmith in the village of Ostnor outside of Mora, Sweden. His "Mora knives" were soon widely acclaimed not only throughout Sweden but also abroad. Success was quickly gained through their superior and outstanding sharpness and toughness. Fourth generation knifesmiths carry on the traditions in a modern factory situated on the same site as the original from 1891.
·Carbon steel blade
·Red birchwood handle
·Stainless steel throat and half guard
·4-1/8" clip pt blade length
·8-1/2" overall
·Black molded composition belt sheath