Item # SCT152
Price: $14.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
·Stainless steel blade
·Sawcut Delrin® handle
·Nickel silver shield and triple rivets
·3-1/2" clip pt blade length
·7" overall
·Leather belt sheath
Item # DBHK7525
Price: $3.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
·Black coated stainless steel one-piece construction
·Green cord wrapped handle
·Lanyard hole
·3-1/2" blade
·7-1/2" overall
·Green nylon belt sheath
·Made in China
Item # RR1243
Price: $9.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
The Hunter's Buddy is designed with the hunter, outdoorsman, and wildlife enthusiast in mind. While each one functions well in the great outdoors, they look and feel great and are the perfect size to go anywhere.
·440A Stainless steel blade
·Burnt stag handle
·Brass guard and pommel
·Brown, brass and red spacers
·Modified Clip point: 2-3/4"
·Blade width: 7/8"
·Blade thickness: 3/16"
·6-1/4" overall
·Leather belt sheath
·Made in Pakistan
Item # FS840
Price: $11.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
There is more than 300 years experience behind today's modern Frosts factory. Frosts Knivfabrik was started more than 100 years ago by Erik Frost, an experienced knifesmith in the village of Ostnor outside of Mora, Sweden. His "Mora knives" were soon widely acclaimed not only throughout Sweden but also abroad. Success was quickly gained through their superior and outstanding sharpness and toughness. Fourth generation knifesmiths carry on the traditions in a modern factory situated on the same site as the original from 1891.
·Carbon steel blade
·Red/black soft thermoplastic rubber handle
·4" drop pt blade length
·8-1/2" overall
·Black composition belt sheath
Item # SOGM37
Price: $39.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
The SEALs are elite among specialized military groups in the world today. Only a select few endure, earning the right to wear the SEAL trident on their uniform. The knife chosen by the Navy for the SEALs must be no less worthy. This is the smaller version of the original SEAL knife.
·AUS-8 stainless steel blade
·Scratch resistant powder coating
·Glass-reinforced Zytel® handle
·Lanyard hole
·4-3/4" clip pt blade length
·9" overall
·Tactical nylon sheath
·Made in Taiwan
Item # SOGF03T
Price: $37.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
·420 stainless steel blade with hardcased black TiNi finish
·Sawback spine
·Black Kraton® handle with Digi-Grip™
·10" blade length
·15-5/16" overall length
·Serves as a small machete, limb saw or hammer
·Nylon belt sheath
·Made in China
Item # RR1242
Price: $8.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
The Hunter's Buddy is designed with the hunter, outdoorsman, and wildlife enthusiast in mind. While each one functions well in the great outdoors, they look and feel great and are the perfect size to go anywhere.
·440A Stainless steel blade
·Burnt stag handle
·Brass guard and pommel
·Brown, brass and red spacers
·3" blade length
·Blade width: 7/8"
·Blade thickness: 3/16"
·6" overall
·Leather belt sheath
·Made in Pakistan
Item # DBJM001L
Price: $8.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
·Stainless steel blade with sawback spine
·Black rubber handle
·Stainless steel guard and pommel
·10" blade
·15" overall
·Black nylon belt sheath
·Made in China
Item # FS11827
Price: $12.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
There is more than 300 years experience behind today's modern Frosts factory. Frosts Knivfabrik was started more than 100 years ago by Erik Frost, an experienced knifesmith in the village of Ostnor outside of Mora, Sweden. His "Mora knives" were soon widely acclaimed not only throughout Sweden but also abroad. Success was quickly gained through their superior and outstanding sharpness and toughness. Fourth generation knifesmiths carry on the traditions in a modern factory situated on the same site as the original from 1891.
·Stainless steel blade
·Military green/black soft thermoplastic rubber handle
·8-1/2" overall
·Military green composition belt sheath
Item # SCT158
Price: $14.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
·Stainless steel blade
·Sawcut Delrin® handle
·Nickel silver shield and triple rivets
·3-1/2" blade length
·7-1/2" overall
·Leather belt sheath
Item # BLSM02
Price: $6.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
·Half tang blank
·Stainless steel construction
·Slightly sharpened edge
·No rivet holes
·6-1/4" overall
·Just add the handle material of your choice!
Item # DBHK7526
Price: $3.99
In Stock
In Stock
Pre-order only. Available after: 05/25/2013
Ships after: 05/25/2013
Back Order Item
Out of stock
Can't Order
·Black coated stainless steel one-piece construction
·Green cord wrapped handle
·Lanyard hole
·3-1/2" blade
·7-1/2" overall
·Green nylon belt sheath
·Made in China
